[Vasechkin]

Поставил и обновил Ubuntu 10.10. Проблема так и осталась :-(
Вот новые логи:

uname -a
home-PC 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 11:55:36 UTC 2010 x86_64 GNU/Linux
lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 1199:6856 Sierra Wireless, Inc. ATT "USB Connect 881"
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg | tail
[ 11.104532] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro,commit=0
[ 12.416125] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 12.562500] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro,commit=0
[ 103.470139] usb 3-1: USB disconnect, address 2
[ 109.090014] usb 3-1: new low speed USB device using ohci_hcd and address 3
[ 109.290579] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input4
[ 109.290664] logitech 0003:046D:C517.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-1/input0
[ 109.298356] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor
[ 109.298946] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input5
[ 109.299131] logitech 0003:046D:C517.0004: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-1/input1
cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=10000000000000 0

I: Bus=0003 Vendor=046d Product=c517 Version=0110
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:13.1-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input4
U: Uniq=
H: Handlers=sysrq kbd event2
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=1f

I: Bus=0003 Vendor=046d Product=c517 Version=0110
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:13.1-1/input1
S: Sysfs=/devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input5
U: Uniq=
H: Handlers=kbd mouse0 event3
B: EV=1f
B: KEY=c0000000 837fff042c332f bf08444500000000 ff0001 1f848b37cc00 667bfadd71dfed 9e000000000000 0
B: REL=1c3
B: ABS=100000000
B: MSC=10
grep -i mouse /var/log/Xorg.0.log
[ 11.039] (==) RADEON(0): Silken mouse enabled
[ 11.242] (II) Logitech USB Receiver: Found 12 mouse buttons
[ 11.242] (II) Logitech USB Receiver: Configuring as mouse
[ 11.243] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 109.307] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 109.472] (II) Logitech USB Receiver: Found 12 mouse buttons
[ 109.472] (II) Logitech USB Receiver: Configuring as mouse