rx packet lost

[naehi8sh]

freeBSD 6.3
mpd5
машина работает как роутер
пстонно выдается в логах vr0: rx packet lost
подскажите что это озночает и из-за чего?

[DeeMaje]

Лог кинь. А то по одной фразе непонятно. Типа того:
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
pid 49742 (conftest), uid 0: exited on signal 11 (core dumped)
pid 53439 (conftest), uid 0: exited on signal 11 (core dumped)
Limiting closed port RST response from 333 to 200 packets/sec
Limiting closed port RST response from 328 to 200 packets/sec
Limiting closed port RST response from 333 to 200 packets/sec
Limiting closed port RST response from 337 to 200 packets/sec
Limiting closed port RST response from 338 to 200 packets/sec
Limiting closed port RST response from 342 to 200 packets/sec
Limiting closed port RST response from 293 to 200 packets/sec
Limiting closed port RST response from 286 to 200 packets/sec
pid 71392 (elinks), uid 0: exited on signal 6 (core dumped)
Out of mbuf address space!
Consider increasing NMBCLUSTERS
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
All mbufs or mbuf clusters exhausted, please see tuning(7).
rl0: discard oversize frame (ether type ed3 flags 3 len 32825 > max 1514)
rl0: discard oversize frame (ether type 8149 flags 3 len 53139 > max 1514)
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost

[gloom]

вот сюда загляните http://forum.nag.ru/forum/index.php?showtopic=38987

[naehi8sh]

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE #0: Thu Feb 21 03:45:18 YEKT 2008
    [email protected]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <VIA694 MSI ACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 1700+ (1460.82-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!>
real memory  = 268369920 (255 MB)
avail memory = 253079552 (241 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 21 2008 03:44:52)
acpi0: <VIA694 MSI ACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
pci_link3: BIOS IRQ 12 does not match initial IRQ 10
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> mem 0xda000000-0xda3fffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 7.3 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xdc00-0xdcff mem 0xda400000-0xda4000ff irq 19 at device 10.0 on pci0
vr0: Quirks: 0x0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:19:5b:8a:fe:4a
rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xda401000-0xda4010ff irq 17 at device 12.0 on pci0
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:f4:6f:76:66
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1460822488 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
hptrr: no controller detected.
ad0: 19594MB <MAXTOR 6L020L1 A93.0500> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
rl0: link state changed to UP
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: promiscuous mode enabled
vr0: promiscuous mode disabled
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost
vr0: rx packet lost - в периоде